 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TECHNICAL DATA Octal D-type flip-flop (3-state) IN74VHCT374 is designed for using in up-to-date high performance computers, high-level electronic equipment for mass application. IN74VHCT374 is identical in pinout to the series IN74HC374A, IN74HCT374A, IN74AC374A, IN74ACT374A. Input voltage levels are compatible with standard TTLlevels. Output voltage levels are compatible with input levels of C-MOS, N-MOS and TTL ICs. IN74VHCT374 ORDERING INFORMATION IN74VHCT374N Plastic IN74VHCT374DW SOIC TA = -40 to 85 C for all packages Features : * * * * * * * * * . Supply voltage range 4.5 to 5.5 V. Output current 8 mA. Low consumption current: 0.2 mkA (typical value) at = 25 . Latchup current not less than 300 mA at = 85 . Tolerable value of static potential not less than 2000 V as per human body model (HBM) and not less than 200 V as per machine model (). Ambient operation temperature minus 40 to plus 85 . Balanced signal propagation delay. Ensures voltage exceeding mode on input Low noise level at the simultaneous switching of outputs in the same state: VOLP = 0.8 V (max). 1 IN74VHCT374 IN74VHCT374 truth table Input Output D H L L, H, X X X Q H L Qo Z OE L L L H CP Note - H - high voltage level; L - low voltage level; X - any voltage level (low or high); Qo - storage of the previous state; Z - output in the third - transition from low into high level; - transition from high into low level Pins description in IN74VHC374 Pinout Pin No. 01 02 Symbol Description Input OUTPUT ENABLE Data output Data input Data input Data output Data output Data input Data input Data output Common output Input of clock signal Data output Data input Data input Data output Data output Data input Data input Data output Supply output from voltage source OE Q0 D0 D1 Q1 Q2 D2 D3 Q3 GND CP Q4 D4 D5 Q5 Q6 D6 D7 Q7 Vcc OE 01 Q0 D0 D1 Q1 Q2 D2 D3 Q3 02 03 04 05 06 07 08 09 20 19 18 17 16 15 14 13 12 11 VCC Q7 D7 D6 Q6 Q5 D5 D4 Q4 CP 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 GND 10 2 IN74VHCT374 Absolute maximum conditions* Parameter, unit Supply voltage, V Input voltage, V Output voltage, V Output voltage, V Input diode current, mA Current of common output and supply output, mA Output current, mA Output diode current, mA Dissipated power, mW Symbol VCC Vin Vout Vout1 Iik Icc Iout Iok Pd min -0.5 -0.5 -0.5 -0.5 Value max 7.0 7.0 VCC + 0.5B 7.0 -20 75 25 20 180 *Under absolute maximum conditions operation of microcircuit is not guaranteed. Operation is guaranteed under maximum conditions Maximum conditions Parameter, unit Symbol Value max 5.5 VCC VCC 5.5* 8.0 20 - outputs min Supply voltage, V VCC 4.5 Input voltage,V Vin 0 Output voltage, V Vout 0 Output voltage, V Vout1 0 Output current, mA Iout Input rise and fall time, ns/V tLH, tHL 0 * - For ICs without third state on outputs - Vcc = 0V, for ICs with third state on outputs should be in third state 3 IN74VHCT374 DC electrical characteristics Value Symbo l VIH VIL VOH Parameter High input voltage Test conditions VCC, V 25 C min 2.0 - 4.42 5.42 3.94 - - - max 0.8 - - - 0.09 0.09 0.36 0.25 0.1 0.1 4.0 1.35 -40 to 85 C min max 2.0 - 4.4 5.4 3.80 - - - 0.8 - - - 0.1 0.1 0.44 2.5 1.0 1.0 40.0 1.5 mA Unit VOL IOZ II IIH1 ICC ICCT 4.5 - VO 0.1 V or 5.5 VO VCC -0.1 Low input voltage 4.5 - VO 0.1 V or 5.5 VO VCC -0.1 High output voltage VI = VIH or VIL 4.5 IO = -50 mkA 5.5 VI = VIH or VIL; 4.5 IO = -8 mA Low output voltage VI = VIH or VIL 4.5 IO = 50 mkA 5.5 VI = VIH or VIL 4.5 IO = 8 mA 5.5 Output current in VI = 2.0V "off" state VO = VCC or 0V Input current VI = 0 V or VCC 5.5 High level input VI = 5.5V 0 current Consumption current VI =VCC or 0V 5.5 TTL-input VI consumption current = 3.4 V 5.5 V - - uA 4 IN74VHCT374 AC electrical characteristics (tLH = tHL = 3.0 ns, RL = 1 kOhm) Value Symbol Parameter Test conditions VCC, V CL, pF 25 C min - - - max 9.4 10.4 11.2 -40 to 85 C min max - 10.5 - 11.5 - 12.0 Unit ns tPHL, tPLH Propagation delay time Fig 1 when switching "on", "off" from input CP to output Q tPHZ , tPLZ Propagation delay time Fig 2 under transition from high , low level into "off" state tPZH , tPZL Propagation delay time Fig 2 under transition from off state into high, low level tSU Time of setting signal D Fig 3 to CP tH Retention time, D signal Fig 3 to CP tW Pulse duration of CP Fig 3 signal tOSLH, Propagation delays tOSHL difference between outputs fC Clock pulses maximum Fig 4 frequency 5.0 0.5 15 50 5.0 0.5 50 ns 5.0 0.5 15 50 5.0 0.5 15 50 5.0 0.5 15 50 5.0 0.5 15 50 5.5 0.5 50 5.0 0.5 15 50 - - 2.5 2.5 2.5 2.5 6.5 6.5 - - - 10.2 11.4 - - - - - - 1.0 90 85 - - 2.5 2.5 2.5 2.5 8.5 8.5 - - - 11.5 13.0 - - - - - - 1.0 80 75 ns ns - MHz Capacitance characteristics Symbol CI CO CD Parameter Input capacity Output capacity Dynamic capacity Test conditions VI = 0 V orVCC VCC, V 5.0 5.0 5.0 Value 25 C min max 10 18 64 Unit pF pF pF 5 IN74VHCT374 Noise characteristics (CL = 50 pF) Parameter Symbol VOLP VOLV VIHD VILD VCC, V Positive noise of low output voltage 5.0 Negative noise of low output 5.0 voltage Input dynamic high voltage Input dynamic low voltage 5.0 5.0 min -0.9 3.5 1.5 Value max 0.9 Unit V - - Time diagram of input and output pulses tLH 0.9 Input 0.1 tPLH 0.5 0.5 0.1 tPHL GND VCC tHL 0.9 3.0 V Output 1.5 V 1.5 V 0V Fig. 1 tHL 0.9 0.5 0.1 tPZH Output tPHZ 1.5 V tPLZ Output tPZL 1.5 V 0.1 VOL 0V VCC 0.1 0.9 0.5 0V VOH tLH 0.9 3.0 V Fig.2 6 IN74VHCT374 Time diagram of input pulses 3.0 V Input D 0.5 tSU tH 0.5 GND 3.0 V 0.5 tW 0.5 GND Input CP Fig. 3 Time diagram of clock pulses T = 1/fc VCC Input CP 0.5 tW 0.5 GND Fig.4 7 IN74VHCT374 N SUFFIX PLASTIC DIP (MS - 001AD) A Dimension, mm 20 11 B 1 10 Symbol A B C MIN 24.89 6.1 MAX 26.92 7.11 5.33 F L D F 0.36 1.14 2.54 7.62 0 2.92 7.62 0.2 0.38 0.56 1.78 C -T- SEATING N G D 0.25 (0.010) M T K PLANE G H H J M J K L M N 10 3.81 8.26 0.36 NOTES: 1. Dimensions "A", "B" do not include mold flash or protrusions. Maximum mold flash or protrusions 0.25 mm (0.010) per side. D SUFFIX SOIC (MS - 013AC) A 20 11 Dimension, mm Symbol MIN 12.6 7.4 2.35 0.33 0.4 1.27 9.53 0 0.1 0.23 10 0.25 8 0.3 0.32 10.65 0.75 MAX 13 7.6 2.65 0.51 1.27 H B P A B 1 G 10 C R x 45 C D F -TD 0.25 (0.010) M T C M K SEATING PLANE J F M G H J K M P R NOTES: 1. Dimensions A and B do not include mold flash or protrusion. 2. Maximum mold flash or protrusion 0.15 mm (0.006) per side for A; for B 0.25 mm (0.010) per side. 8 |
Price & Availability of IN74VHCT374N
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |